One of the finest and simplest ways to safeguard a range of objects for storage or transportation is to use shrink-wrapping. The goods might be anything from CDs to yachts in terms of size. Small company owners that shrink-wrap their own products before distributing them are some of the most frequent non-industrial shrink-wrapping users. To learn how to shrink-wrap an item using simple shrink-wrapping machines or even using tools found around the house, scroll down and follow the instructions below.

Method 1- The Basic

Select a product to shrink wrap. Among the most frequently purchased shrink-wrapping machines on the market are impulse sealers, which make it simple to alter the thickness and form of an item to be shrink-wrapped. You can pick on further details after selecting the item to shrink wrap.

Pick a shrink-wrapping film type. Polyvinyl chloride (PVC) and polyolefin are the two most often used shrink-wrapping materials. When it comes to covering objects with sharp corners and covering food, the polyolefin is more odour- and odour-resistant but also more costly.
PVC is still the preferred film for the majority of applications, including CDs and Blu-Rays.
You can also choose among flat rolls of film, pre-made bags in various sizes with three sides completely sealed, or gauge sizes that vary from 60 to 100 based on the particular application.

Your impulse sealer is on. When you lower the arm on an impulse sealer, which mimics a paper cutter, the shrink wrap is sealed rather than sliced (though some models do also have a cutter included).
There will be a knob on your impulse sealer with several heat settings. Your choice of film type and gauge size will determine the precise setting you desire.
Find the appropriate temperature where your film seals without scorching by experimenting on a tiny piece of film or using the suggested heat setting that came with your film.

Get your shrink-wrap film ready.
Fold a flat roll of film around your object in the same way you would wrap a gift: by measuring out the wrapping paper.
Using scissors, cut the film, giving plenty of space to place the extra on the 3 different sides beneath the arm of your impulse sealer.
You may just put your goods in the bag if you got pre-made bags in the right size.

Put a seal on it. Put the film’s exposed edges onto the impulse sealer one side at a time, then shut the arm to heat and seal that side.
The warmth from the seal should make it simple to peel away extra material from the sealed sides of the bag even in versions without a cutter.
Without physically touching the object, try to come as near as you can to the sealer’s arm.
After using the heat gun, this will result in a tidy-looking completed item, and with practice, you’ll be able to use less wrapping material.
Before heat shrinkage, you can use a hole punch to pierce one tiny segment of the sealed bag if you’re shrink-wrapping an item that you still want the buyer to be able to smell (like soap).

Utilizing a heat gun, shrink the bonded film. A heat gun looks like a hairdryer, but it heats the film more uniformly. Make passes over the sealed bag from a distance of several inches. The film will immediately respond to heat by rapidly shrinking to the precise size of the encapsulated object.
To heat the film evenly, turn the object as you run the heat gun over it.
Make cautious to make even passes from several inches away since using the gun too closely or keeping it directed at one place for too long will distort or even destroy the film.

Method 2: The homemade idea

Select a product to shrink wrap. You still need to select the shrink-wrap film that is most suited for the task at hand, just like with the impulse sealer approach described above. PVC film needs to function well using scissors and a blow dryer for most household things.

Wrap the object. Trim a piece of film that size off the roll, then fold the object in the film as if you were gift-wrapping it. The sheet you cut should be one piece, just a little bit more than you require.

Remove any extra film. Cut off any extra shrink-wrap strands. There shouldn’t be any air pockets or exposed regions since the film should adhere to the object securely.

To seal the seam, use the hairdryer. Use the hairdryer to warm straight all along the overhang of the seam to close the film if the manner you wrapped the object left a seam that needs to be closed before you can move on.
To shrink the film uniformly across the remaining portion of the object, heat it. To cause the wrap to shrink, evenly distribute heat from the hairdryer around it. The wrap will not shrink proportionally if you apply it unevenly.
The film will need more time to shrink correctly using a hairdryer than with a heat gun. As uniformly as feasible, heat.
Although this approach needs a lot of work to produce a final result, it will suit its function.

Overall, it is your decision to be crafty or witty or just simply a master. These simple methods will help you master the shrink wrap in no time!
When you need to find a one-stop solution to all your packaging solutions including shrink wraps, do check out one of the best upcoming websites: Klien Packaging! With experiences with big company giants, Klien sees all as the same, from a small box comes the package of thousand of memories.